rocket ship image

Our Exterior Painting Process

Its not rocket science!

Step 1:

Pressure wash all surfaces to be coated.

Step 2:

Hand scrub any areas needing extra attention.

Step 3:

Clean all gutters and roofs of dirt and debris.

Step 4:

Scrape and sand all loose and peeling paints.

Step 5:

Spot prime all raw wood areas.

Step 6:

Caulk and fill areas that water might enter.

Step 7:

If sprayed, back brush or back roll all first coats.

Step 8:

Topcoat all areas after dry times have been observed.

We always . . .

  • Use no less than two coats on all surfaces.
  • Use only 100% acrylic resins on all wood surfaces.
  • Use no less than three coats on all horizontal surfaces.
  • Upgrade to premium quality product only when necessary.
Creative Commons License: Attribution-NoDerivs  CC BY-ND